The DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque, improved stability and good durability.
Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 180°servo will never let you down when you need it. Tested with high load capacity for 12 hours long, this DSS-M15 servo demonstrates a maximum torque of 18Kg without much vibration or heat.
In addition, we enclose carefully selected steering parts, including an aluminium alloy wheel and a long bracket to enhance servo performance.
Specification
| Operating voltage |
4.8-7.2V |
| Test Environment |
6 volts |
7.2 volts |
| Operating speed (without payload) |
0.18 sec/60° |
0.16 sec/60° |
| Quiescent current |
80 mA |
100 mA |
| Stall Torque |
13.5 kg*cm |
15 kg*cm |
| Stall Current |
1.8A |
2A |
| Standby mode current |
4 mA |
5 mA |
| Control signal |
RC PWM |
| Pulse width range |
500-2500 us |
| Neutral position signal |
1500 us |
| Clockwise rotation |
<1500 us |
| Operating frequency |
50 - 330Hz (Arduino compatible) |
| Materials of gear |
Metal Gear |
| Limited angle |
About 180° |
| Connector wire gauge |
28 PVC |
| Wire length |
About 320 mm |
| Horn gear spline |
25T /5.80 |
| Geared ratio |
310:1 |
| Dimension |
54.5 X 20 x 47.5 mm |
Package Contents
- DSS-M15 Servo x1
- Metal round servo horn x1
- X servo horn x1
- long straight servo horn x1
- Straight servo horn x1
- M2*8 self-tapping screw x5
- M2 screw washer x5
- M3*6 screw x1
DF Metal Geared 15Kg Standard Servo 180° (DSS-M15)
